![]() ![]() ![]() Ensure that it is formatted as NTFS or ext4. Plug your USB storage device that you plan on using into your PC.At this point, safely eject the SD card and plug it back into your powered-off Xbox 360. Click the Save to File on the right-hand side and save it as dummy.bin (slims) or firmware.bin (phats) on your XK3Y SD card.Select the drop down for "Spoofed As" at the bottom of the screen, but don't select an option, and press OK. If you are using a stock firmware as your Source firmware, select the "Manual Spoofing" button on the right-hand side, enter your DVD key in the top field. Select the Open Target Firmware button on the right-hand side and choose it. Download the stock firmware for your DVD model.Alternatively, if you know your DVD key, you can select the stock firmware for your DVD model and select "No" if prompted to auto-load a firmware or set the DVD key. Select "No" if prompted to auto-load a firmware. ![]() This will populate your DVD drive information in the top half of the window, including your DVD key. Select the Open Source Firmware button on the right-hand side and choose your DVD firmware dump.However, if you receive an error about libusb0.dll missing, you will need to copy libusb0.dll from the "libusb folder into the main Jungle Flasher folder in order for the program to run. You may receive an error when opening on a 64-bit PC, missing ports, or missing files, which you can ignore. Download and extract JungleFlasher and open JungleFlasher.exe.If there are any files present, delete them. It should pop up one usable partition called XKEY. It may complain about needing to format partitions, which you should say "No" or "Cancel" to. Plug your SD card into a SD card reader and into your PC.(Phats) You will need a full dump of your DVD drive, Rename it to firmware.bin.If you used a X360 USB Pro or Jungle Flasher, you will need to test different ALTSLIMFW values in xkey.cfg (discussed later) to get it to work properly due to there being multiple firmware versions for each drive which are only detected by the Maximus Lizard. If you dumped your firmware with a Maximus Lizard, proceed to the next step. (Slims) Rename your firmware dump to dummy.bin.This can be done by dumping the NAND of the Xbox or by using a Maximus Lizard, an X360 USB Pro, or with Jungle Flasher (specific drives only). The most difficult and important step is to dump your DVD key and/or DVD firmware (which includes the DVD key). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |